Pendulum Rides which are also known as Frisbee Rides are thrilling amusement rides, which are commonly found at large amusement or theme parks.
Pendulum Rides Components And Parts
Pendulum Rides are made up of several components and parts. Here is an introduction to the more common components of these rides:
Mechanical Components Of A Pendulum Ride for Sale:
#1 Air Cylinder
The air cylinder converts compressed air-pressure energy into mechanical energy. It assists the driving-mechanism to perform linear reciprocating motions, rotating motions, and swinging. Most pendulum rides come equipped with a double-acting cylinder.
#2 Chicken Leg Shoulder
Most of the shoulders that are used in amusement park rides like roller coaster amusement park rides for sale consist of average-strength steel and serve the purpose of protecting the riders from falling off or out of a ride. Chicken leg shoulders use higher-strength steel that improves safety when the pendulum ride is swinging.
#3 Flange
The flange is used mainly to connect various parts of a pendulum ride. The flange connection is made of a bolt, a gasket, and a flange that connect together. The bolt and the gasket are fixed to the flange followed by a fitted flange pad that is all bolted together. This is what completes a flange connection.
#4 Air Compressor
The air compressor is an important part that compresses the gas so that the shoulder part of the ride opens. It also assists the platforms of these rides to retract and extend when riders stand on them. It is used for most of the amusement park rides, such as carousels – https://bestonamusementrides.com/carousel-for-sale/, self-control plane ride, disco ride, etc.
#5 Brake Motor
The movement of the pendulum ride includes many starts and brakes. The brake motor assists the pendulum ride to achieve these actions. The brake motor achieves accurate positioning and fast braking in a reliable and safe manner.
#6 Standard Slewing Bearing
Standard slewing bearings are large bearings designed to withstand both large radial and axial loads. It is commonly used for fixing the main column and the central axis of a pendulum ride.
#7 Threaded Hole
This is a component of a pendulum ride that is used for installing and connecting different parts of this ride.
#8 Deep Groove Ball Bearing
Deep Groove Ball Bearings are the rolling bearings that are most commonly used. It features a simple structure that is used mainly for bearing radial loads.
#9 Planetary Reducer
Planetary reducers are used for reducing the motor’s speed while at the same time increasing output torque. It assists with decelerating the ride and driving the column so that it rotates.
#10 Bearing Roller
The outer-ring of a bearing roller includes a comprehensive cylindrical roller-bearing that features a thick outer wall. These rollers are designed to bear impact loads and heavier loads. It is also used to limit the platforms of the pendulum ride from leading amusement rides manufacturer www.bestonamusementrides.com to a designated position.
#11 Torsion Limited Coupling
This is a component that is used for connecting the driven shaft and driving shaft in various mechanisms so that they can rotate together, as well as transmit torque and motion.
The torsion-limited coupling is also used for compensating for any deviation that occurs between the 2 shafts caused by inaccuracies in installation and manufacturing.